|
| |
|
Lifting
Clamps - are specialized tools. With hundreds of different
models and types and manufacturers available it would be impossible in
this catalog to even list them all. However, to achieve maximum clamp
life and to help avoid accidents please observe the following
precautions
 | Use the right
clamp for the job - when in doubt call us for assistance.
| Read and
follow the instructions in the Operators Manual. |
|
For purposes of
the catalog we have selected a "UNIVERSAL" clamp for lifting,
turning (180°) and vertical transfer of steel plates and constructions.
The hinged hoisting eye allows the user to place and lift the load from
virtually any direction. They are intended for
industrial use only and should not lift, support or
otherwise transport people.
|
 |
| Capacity
in Tons |
Model |
Jaw
Aperture, In. |
Weight
Each, Lbs. |
| 3/4 |
IP-51 |
0 - 5/8 |
4 |
| 1
- 1/2 |
IP-52 |
5/8 - 1-1/4 |
4 |
| IP-53 |
0 - 3/4 |
17 |
| IP-54 |
3/4 - 1-5/8 |
17 |
| 3 |
IP-55 |
0 - 1 |
35 |
| IP-56 |
1 - 2 |
36 |
| 4-1/2 |
IP-57 |
0 - 1 |
35 |
| IP-58 |
1 - 2 |
37 |
| 6 |
IP-39 |
0 - 1-1/4 |
50 |
| IP-40 |
1-1/4 - 2-1/2 |
51 |
| 9 |
IP-41 |
0 - 1-5/8 |
63 |
| IP-41 |
1-5/8 - 1-3/8 |
64 |
| 12 |
IP-78 |
0 - 2-1/8 |
126 |
| IP-79 |
2-1/8 - 4-1/4 |
130 |
Top
Of Page
|
DO NOT
EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.
|
|
Beam
Clamps - rated from 1 - 5 tons
INDUSCO beam clamps have specially designed clamp jaws that reduce
stress by distributing load away from flange edge. The threaded
adjustment mechanism fits securely on a wide range of flange widths and
beams. They can be permanent or temporary and provide lower
headroom with the built in suspension bar. They
are intended for industrial use only and should not lift,
support or otherwise transport people.
|
 |
|
| Model |
Rated Laod (Lbs.) |
Flange Width (In.) |
A Max. |
B |
C (In.) |
D (In.) |
E (In.) |
F |
G (In.) |
H |
Net Weight (Lbs.) |
| Min. |
Max. |
Min. |
Max. |
| BC-1 |
2000 |
3-9 |
10.6 |
6.9 |
14.4 |
2.9 |
0.2 |
8.4 |
5.4 |
2.9 |
1.2 |
.80 |
8.8 |
| BC-2 |
4000 |
3-9 |
10.6 |
7.3 |
15.0 |
2.9 |
0.2 |
8.4 |
5.4 |
2.9 |
1.2 |
.80 |
13.2 |
| BC-3 |
6000 |
3.9-9 |
11.6 |
8.7 |
16.7 |
4.0 |
0.3 |
10.0 |
6.3 |
4.1 |
2.4 |
.87 |
17.6 |
| BC-5 |
10000 |
3.9-10.2 |
12.6 |
9.8 |
18.7 |
4.0 |
0.3 |
10.0 |
6.3 |
3.5 |
1.8 |
1.10 |
22.0 |
Top
Of Page
|
DO NOT
EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.
|
|
Trolleys
- rated from ¼-5 tons INDUSCO trolleys provide an economical
means to increase the efficiency in your work area. The wrap-around side
plates act in a dual purpose role: as safety lugs to prevent dropping of
load and protecting the trolley wheels, as well. They are adjustable,
rugged, and low maintenance. They are intended for
industrial use only and should not lift, support, or
otherwise transport people.
|
 |
| Model Number |
Capacity (Ton) |
Beam Height (In.) |
Flange Width (In.) |
Minimum Radius Curve (In.) |
Wheel (In.) |
Shipping Weight (Lbs.) |
| LMTC-500 |
1/4 |
4-10 |
2.66 - 4.66 |
36 |
2-1/4 |
14 |
| LMTC-1000 |
1/2 |
4-10 |
2.66 - 4.66 |
36 |
2-1/4 |
14 |
| LMTC-2000 |
1 |
5 - 12 |
3.00 - 5.00 |
48 |
2-3/4 |
23 |
| LMTC-3000 |
1-1/2 |
6 - 18 |
3.33 - 6.00 |
60 |
4-1/4 |
52 |
| LMTC-4000 |
2 |
6 - 18 |
3.33 - 6.00 |
60 |
4-1/4 |
52 |
| LMTC-6000 |
3 |
8 - 20 |
4.00 - 6.25 |
60 |
4-1/4 |
60 |
| LMTC-10000 |
5 |
10 - 24 |
4.66 - 7.00 |
60 |
3-3/8 |
96 |
|
DO NOT
EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.
|
|
