RATCHET STRAPS

RELIABLE, PORTABLE UNITS DESIGNED FOR EASY; RAPID LOAD SECURING.

TO OPERATE - Pull webbing thru roller to take up slack. Operate buckle handle back and forth until webbing is properly tensioned. Close handle fully.

TO RELEASE - Disengage lock latch and rotate handle over center.

Furnished with Flat Hooks on Ratchet and Webbing ends.

Standard length furnished: 27 feet. Custom lengths available.

Custom end fittings available to suit your specific needs.

DOT rated to 3400 pounds.

NOT FOR LIFTING OR HOISTING PURPOSES.

 

 


TRAILER WINCHES & STRAPS

DESIGNED TO BE USED FOR FLAT BED TRUCK OPERATION WHERE HEAVIER DUTY, WIDER BIGHT IS PREFERRED AND NECESSARY.

FURNISHED 4" wide x 27' long with Flat Hook. Optional hardware available: O-rings or Grab Hooks.

12,000 pound capacity.

Available in three styles:

Standard Weld-on*

 *Minimum welding requirement is 1/4" fillet weld, 4" long on both sides of frame 1/8" penetration.

 Standard Portable (Bolt-on)*

 *Set screws on Portable type should be snug tightened only as over-tightening may cause bracket to bend, weakening winch, causing it to fail.

 Standard Sliding

 * Slides along either a steel or aluminum track to the exact point tie down is required.

Winch Bars and Sliding Track available.