|
|
Galvanized -
Improved Plow Steel
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Approximately the same general application as 6x19 bright, but where extra resistance to corrosion is required. Continuous bending around sheaves and drums should be avoided. Examples: Shroud lines for the marine industry.
|
|
Meets Design
Requirements According to Federal Specification RRW-41OD
|
Diameter Inches |
Galvanized - Improved Plow Steel |
Diameter Inches |
|||
Fiber Core |
IWRC |
||||
Approx. Weight Per Foot Pounds |
Minimum Breaking Strength Net Tons |
Approx. Weight per Foot Pounds |
Minimum Breaking Strength Net Tons |
||
| 1/4 | .105 | 2.74 | .116 | 2.65 | 1/4 |
| 5/16 | .164 | 3.83 | .180 | 4.12 | 5/16 |
| 3/8 | .236 | 5.49 | .26 | 4.9 | 3/8 |
| 7/16 | .32 | 7.44 | .35 | 8.0 | 7/17 |
| 1/2 | .42 | 9.63 | .46 | 10.3 | 1/2 |
| 9/16 | .53 | 12.1 | .59 | 13.0 | 9/16 |
| 5/8 | .66 | 15.0 | .72 | 16.1 | 5/8 |
| 3/4 | .95 | 21.4 | 1.04 | 23.0 | 3/4 |
| 7/8 | 1.29 | 29.0 | 1.42 | 31.1 | 7/8 |
| 1 | 1.68 | 37.6 | 1.85 | 40.4 | 1 |
| 1-1/8 | 2.13 | 47.3 | 2.34 | 50.9 | 1-1/8 |
| 1-1/4 | 2.63 | 58.1 | 2.89 | 62.5 | 1-1/4 |
| 1-3/8 | 3.18 | 69.9 | 3.50 | 75.1 | 1-3/8 |
| 1-1/2 | 3.78 | 82.8 | 4.16 | 89.0 | 1-1/2 |
| 1-5/8 | 4.44 | 96.3 | 4.88 | 103.5 | 1-5/8 |
| 1-3/4 | 5.15 | 112.0 | 5.67 | 119.9 | 1-3/4 |
| 2 | 6.72 | 144.0 | 7.39 | 154.8 | 2 |
| 2-1/4 | 8.51 | 180.0 | 9.36 | 193.5 | 2-1/4 |
| 2-1/2 | 10.5 | 220.0 | 11.6 | 236.0 | 2-1/2 |
| 2-3/4 | 12.7 | 263.0 | 14.0 | 282.5 | 2-3/4 |
Search Services
About
Us Contact Us Technical
Sources
|
